Lake St. Clair Fishing Forum banner
1 - 12 of 12 Posts

·
Premium Member
Joined
·
11,184 Posts
Discussion Starter · #1 ·
Is it a good idea to take a 24' Pontoon out on LSC? I've seen them in channels, but I don't know if I've seen them out on the lake.

Would that be okay out there?
 

·
Registered
Joined
·
6,838 Posts
Is someone planning to take one to Jobbie? I would not want to cross the lake on a weekend in one but wouldn't be scared to take one from harsens to one of the bays or gull.
 

·
Registered
Joined
·
531 Posts
hey you might be on to something there.

Imagine a whole lake full of those. It'd be like a floating trailer park.

Somehow I have a feeling this is going to end up on a Jeff foxworthy show.

You might be a LSC ******* if your houseboat used to have wheels.
 

·
Registered
Joined
·
2,550 Posts
QUOTE(EDBDBOAT @ Jun 24 2004, 04:50 PM)hey you might be on to something there.

Imagine a whole lake full of those. It'd be like a floating trailer park.

Somehow I have a feeling this is going to end up on a Jeff foxworthy show.

You might be a LSC ******* if your houseboat used to have wheels.

Just go to Lake Norman, or Lake Cumberland! They're all over the place!
 

·
Registered
Joined
·
1,648 Posts
yeah like he said go real earl in the morning if you can, and be very careful we've had friends ponton go half under from hitting one wake head on, brought the whole bow half way up the deck under water....so be careful
 

·
Registered
Joined
·
154 Posts
I've crossed from the North Channel to Munchies Bay three times in a pontoon and each time, when we went straight into a wave, the nose goes down and the wave crashes and washes out the whole boat.

I'd advise against a pontoon in rough waters! It cannot break the wave, so the wave just crashes over the boat and floods it out.

Do not do it!

A pontoon floats on top of the water and any rough waters will be felt. A pontoon will not break the waves.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top