Lake St. Clair Fishing Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter · #1 ·
I had the boat up on Torch Lake last week. Tied up at the Dockside, in rather rough water, and the forward cuddy window was cracked from banging up against the dock.

Any advise as to where I can get parts for this? I think it is just tinted plexiglass.

Should I go to a Four Winns dealer??
 

Attachments

·
Registered
Joined
·
512 Posts
If you can take it apart (in one piece preferrably) see what color and thickness it is.

You can usually get a duplicate made from your local glass shop, such as Henderson Glass. Just take in the broke piece or make a pattern (by tracing it on cardboard or paper).

Many glass shops don't always stock the thinner plexiglass in tinted, but call around to see who has a small pc. You can either have them cut it, or just get a cut-off piece and cut it yourself with a skill saw or stanley knife, then sand the edges.
 
1 - 2 of 2 Posts
Top