Lake St. Clair Fishing Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
894 Posts
Discussion Starter · #1 ·
Help!
I have several pieces of stainless steel that I need to
have cut to size.
Does anyone know where i could go?

Thanks in advance for your help.
 

·
Registered
Joined
·
10,183 Posts
Your garage or basement??
Not sure how big of a peice you're trying to cut, or how complicated the cuts, but that's where I would have started....

but seriously.....

There's a place in Livonia I've been meaning to visit. Sounds like a cool place for all sorts of metal and plastic, and they do machining and cutting. I do NOT know how good they are on prices, or really any other details.

Here is a link to their site: http://www.alro.com/Welcome.aspx

I'm just curious, but do you know what type of stainless are you using??
 

·
Moderator
Joined
·
12,052 Posts
I would not use alro. they screw stuff up for us all the time.

what is before and after size? you have the stock?
 

·
Registered
Joined
·
22,943 Posts
I'm guessing a swim platform outboard mount.


I could check out the Alro, Livonia place, if needed. That's about 3 miles from here.
 

·
Registered
Joined
·
207 Posts
QUOTE(Secret Agent @ Jul 7 2009, 07:21 PM) <{POST_SNAPBACK}>Help!
I have several pieces of stainless steel that I need to
have cut to size.
Does anyone know where i could go?

Thanks in advance for your help.

A.D.M Air Control in Dearborn Heights, They did all of our stainless at Riverside and have the best prices around. Can cut bend and weld custom stuff too....
 

·
Registered
Joined
·
2,131 Posts
Sue,

Here is who does all my furnace plenums (side A/C, furnace jobs) and our stainless BBQ front.

J & J Sheet Metal <here>
 

·
Registered
Joined
·
894 Posts
Discussion Starter · #9 ·
Thanks everyone.
Not sure on the stainless??
Food Grade type.
Not sure how thick either.

I have the stainless.

Size is about 3 inch by 20 ish. Total guess but have the
measurements in the car.

I am looking to make 2 slider doors for our pizza oven
so the HOT air won't blare out the side of the oven.

We currently have 1 glass door. The second one shattered
when someone slid the door closed to hard.
This oven is pretty dated and Blodgett does not carry this part
any longer.
I would try to cut it myself but want it be a straight
cut.

AP I like your answer
 

·
Vendor
Joined
·
12,824 Posts
I would try that J&J. If not, maybe Supreme Welding would be able to help you. On 15 mile west of Harper.
 

·
Registered
Joined
·
2,131 Posts
QUOTE(Secret Agent @ Jul 8 2009, 09:33 AM) <{POST_SNAPBACK}>Thanks everyone.
Not sure on the stainless??
Food Grade type.
Not sure how thick either.

I have the stainless.

Size is about 3 inch by 20 ish. Total guess but have the
measurements in the car.

I am looking to make 2 slider doors for our pizza oven
so the HOT air won't blare out the side of the oven.

We currently have 1 glass door. The second one shattered
when someone slid the door closed to hard.
This oven is pretty dated and Blodgett does not carry this part
any longer.
I would try to cut it myself but want it be a straight
cut.

AP I like your answer

They can also fold the edges so you dont have a sharp edge.
 

·
Moderator
Joined
·
12,052 Posts
alro does not machine, probably neither does supreme welding? macomb sheet metal sounds like the place.
 
1 - 13 of 13 Posts
Top